快猫. apk

National unified service hotline: 135-7635-1398

江西同欣机械制造股份有限公司

categories of news

contact us

Jiangxi Tongxin Machinery Manufacturing Co., Ltd.


Address: First Road, Lulin Industrial Zone, Guangfeng District, Shangrao City, Jiangxi Province

Phone: 135-7635-1398

Contact: Mr. Liu

Postcode: 334600

xintezhongliu.cn Website: xintezhongliu.cn

Industry news

Your current location : Home >> News >> Industry News
  • You don't know about camshaft position sensors

    &
    Release time: 2018-03-26 Clicks: 494

  • The importance of wheelbase

    From a design perspective, the wheelbase is a very important parameter, which is closely related to the performance of the car. The wheelbase determines the position of the car's center of gravity. Therefore, once the wheelbase of the car is changed, the general layout design must be re-designed, especially the size of the drive train and body parts, the parameters of the spring and shock absorber in the suspension system, and the size of the steering trapezoidal tie rod in the steering system. Simultaneous wheelbase
    Release time: 2017-12-18 Hits: 426

  • Impact of vehicle wheelbase on vehicle performance

    If the wheelbase is too short or too long, it will affect the performance of the entire vehicle. The shorter the wheelbase of the car, the shorter the length of the car, the lower the mass, the smaller the minimum bend radius and the longitudinal passage radius, the better the maneuverability of the car. However, if the wheelbase is too short, the length of the carriage will be insufficient, and the rear overhang (the distance between the vehicle's last wheel axis and the rear end of the vehicle) will be too long, which will cause longitudinal swing when driving.
    Release time: 2017-12-18 Click times: 447

  • Camshaft position

    There are three types of camshafts: lower, middle, and upper. The camshaft of the lower-mounted valve mechanism is located in the crankcase, the camshaft of the central-mounted valve mechanism is located at the upper part of the body, and the camshaft of the upper-type valve mechanism is located on the cylinder head. The engines of most production cars are now equipped with overhead camshafts. The main advantages of overhead camshaft structure are fewer moving parts and transmission chain
    Release time: 2017-12-17 Click times: 438

  • Structure of the camshaft

    The main body of the camshaft is a cylindrical rod body approximately the same length as the cylinder block. There are several cams on the top for driving the valves. The camshaft is supported in the camshaft bearing hole through the camshaft journal, so the number of camshaft journals is an important factor affecting the rigidity of the camshaft support. If the camshaft stiffness is insufficient, bending deformation will occur during work, affecting the gas distribution
    Release time: 2017-12-02 Click times: 436

  • Classify cars by wheelbase

    In actual use, the length of the wheelbase directly affects the length of the car, which in turn affects the interior use space of the car. According to the length of the wheelbase, cars can be classified into mini cars, small cars, compact cars, medium-sized cars and luxury cars. Miniature car: usually refers to models with axles under 2400mm, which has less legroom in the back seat. If an adult is sitting in the back seat,
    Release time: 2017-11-30 Clicks: 417

  • Camshaft working conditions and materials

    Cam bearings are subject to periodic shock loads. The contact stress between the cam and the tappet is very large, and the relative sliding speed is also high, so the working surface of the cam is relatively worn. In view of this situation, in addition to the higher dimensional accuracy, smaller surface roughness and sufficient rigidity, the camshaft journal and cam working surface should also have higher wear resistance and good lubrication. Convex
    Release time: 2017-11-15 Clicks: 347

  • Camshaft modification

    In order to improve the power of the engine, some modification shops have modified the camshaft of the engine, of which the replacement of high-angle camshaft camshaft (Hi-CAM) is a common modification method. This modification operation is not complicated, but because some modification personnel do not understand the working angle and working principle of the cam on the camshaft, the effect of the modification is not obvious or even leads to
    Release time: 2017-10-31 Click times: 288

  • Camshaft failure

    Common failures of camshafts include abnormal wear, abnormal sounds, and breaks. The abnormal sounds and breaks often show symptoms of abnormal wear before they occur. (1) The camshaft is located almost at the end of the engine lubrication system, so the lubrication condition is not optimistic. If the oil pump has insufficient oil supply pressure due to long use time, etc., or the oil passage is blocked, the oil cannot reach the camshaft
    Release time: 2017-10-17 Clicks: 278

  • Camshaft drive

    Common transmission methods between camshaft and crankshaft include gear transmission, chain transmission and toothed belt transmission. Most of the transmission between the lower camshaft and the middle camshaft and the crankshaft use cylindrical timing gears. Generally, only a pair of gears are required from the crankshaft to the camshaft. If the diameter of the transmission gear is too large, an additional middle can be added. Idler. In order to stabilize the mesh and reduce work
    Release time: 2017-10-03 Click times: 275

  • Camshaft processing technology

    Selection of rough datum: Often the round cylindrical surface of the blank that supports the journal and its one side are used as positioning reference. Some foreign countries (Ford in the United States) use grinding instead of milling. 1. For blanks that are die forgings, especially precision grinding forgings, the accuracy of the blanks is guaranteed by the forging die, which has higher accuracy and machining allowance
    Release time: 2017-09-15 Clicks: 334

  • Daily axle maintenance

    1. Before the vehicle is running, check whether the external connecting bolts of the axle are loose, whether the axle is leaking oil, whether the wheel hub, reducer assembly is abnormal, etc. 2. Mandatory maintenance of axles: A: Mandatory maintenance is carried out between 3000 and 5000 km depending on the operating conditions. B: The first maintenance includes: changing the lubricating oil, gear oil, checking the front axle toe, and adjusting the brake room.
    Release time: 2017-08-15 Hits: 340

  • Car axle number

    1. The number of automobile axles is mainly used in cargo trucks, military vehicles, special vehicles or a small number of buses. An automobile axle (also called an axle) is connected to the frame (or) through a suspension, and wheels are installed at both ends thereof. Function: It is the suspension, not the axle, that transmits force and moment between the frame and the axle (wheel). The role of the axle is to bear the load of the car and keep the car on the road
    Release time: 2017-03-16 Click times: 473

  • Camshaft

    The camshaft is a part of the engine's gas distribution mechanism. It is specifically responsible for driving the valves to open and close on time. The role is to ensure that the engine regularly inhales fresh combustible gas mixture during the work and timely discharges the exhaust gas after combustion. The camshaft drives the valve directly through the rocker arm, which is very suitable for high-speed car engines.
    Release time: 2017-02-16 Click times: 347

  • How to measure the engine overhead camshaft?

    Measurement of the engine overhead camshaft: The camshaft is a key component that affects the working quality of the automotive engine valve train. Its function is to ensure that the engine valve group has an accurate and stable good movement rule. The cam measurement is mainly to evaluate the geometric accuracy of each cam on the camshaft and after installation
    Release time: 2017-02-16 Clicks: 390

  • Construction and classification of camshafts

    Camshaft structure The main body of the camshaft is a cylindrical rod with the same length as the cylinder group. There are several cams on the top for driving the valves. One end of the camshaft is a bearing support point, and the other end is connected to the driving wheel. The sides of the cam are egg-shaped. The purpose of its design is to ensure sufficient intake and exhaust of the cylinder, specifically in the shortest possible time
    Release time: 2016-10-17 Clicks: 336

  • Camshaft works

    The key to the camshaft is the cam. When the camshaft rotates, the cam will open / close the intake and exhaust valves in time with the movement of the piston. Therefore, the shape of the cam is directly related to the working conditions of the engine at different speeds. To understand why, let's first imagine an engine running at extremely slow speeds—10 or 2
    Release time: 2016-10-17 Click times: 278

  • What is a camshaft?

    The camshaft (English: Camshaft) is a component in the engine. Its role is to control the opening and closing actions of the valve. Although the speed of the camshaft is half that of the crankshaft in a four-stroke engine (the speed of the camshaft is the same as that of the crankshaft in a two-stroke engine), it is usually still high and requires a lot of torque.
    Release time: 2016-10-17 Clicks: 287

  • Camshaft position in the engine

    For a long time before, bottom-mounted camshafts were most common in internal combustion engines. Generally, in such an engine, the valve is located at the top of the engine, which is a so-called OHV (OverHead Valve) engine. At this time, the camshaft is usually located on the side of the crankcase, and the valve is controlled by the valve distribution mechanism (such as tappet, push rod, rocker, etc.)
    Release time: 2016-10-17 Clicks: 299

  • Common faults of camshafts

    Common failures of camshafts include abnormal wear, abnormal sounds, and breaks. The abnormal sounds and breaks often show symptoms of abnormal wear before they occur. Camshaft (1) The camshaft is located almost at the end of the engine lubrication system, so the lubrication condition is not optimistic. If the oil pump is used for a long time, etc.
    Release time: 2016-10-17 Clicks: 283

Welcome to leave us a message
Please enter your message here and we will contact you as soon as possible.
Name
Contact person
phone
Landline / mobile number